No Volume From Revel Subwoofer [Causes & Solution]

This article will examine the possible reasons Why No Volume From Revel Subwoofer? and give you some easy steps to take to get your subwoofer back up and running. Experiencing no sound from your Revel subwoofer can be frustrating, especially when everything seems connected correctly. This guide will explain the most likely causes of your Revel subwoofer not making any sound and how to fix it.

No Volume From Revel Subwoofer [Causes & Solution]

There are many reasons for a subwoofer not making a sound, ranging from loose wires to intricate hardware failures. If your Revel subwoofer isn’t producing sound, begin by ensuring the subwoofer is receiving power. Make sure that the power cord is in the subwoofer and into the outlet as well and that the outlet works by trying something else in it.

After verifying that it has power, check all the wires going from the subwoofer to the receiver or integrated amp and make sure that they are securely fastened into the corresponding input/output jacks. Then turn the subwoofer’s volume and gain controls to a sane level and check the receiver settings to ensure that the subwoofer is not muted or turned way down.

Another important thing is to make sure that the subwoofer is on “On” or “Auto On” not standby or off. Also, worn out or defective cables can cause this, so look for any fraying or damage and change them out if they are.

Also, make sure that the receiver has its subwoofer turned on in the settings and that the crossover frequency is set at the appropriate range (80-120 Hz). If not then check the fuse in the subwoofer and if that is blown replace it. Should none of these solutions work, there could be an internal issue, in which case seeking professional repair may be necessary.

Repair Service For Revel B15 Subwoofer 

In case your Revel B15 subwoofer needs repair. The first thing to check if it is the original setup, test all wires, connections, and settings. Otherwise, it’s probably best to get it repaired professionally.

They are a very high-end audio company and they have authorized dealers/repair centers that deal specifically in their product. But it’s always good to contact these authorized centers or dealers so that your subwoofer is dealt with by people who know what they are doing and know the inside and out of the brand.

You can also call Revel’s customer service and they will tell you what the warranty covers and where you can get it fixed. The more complicated problems of amp failure, blown drivers, or PSU malfunctions will be remedied by these services with real parts and correct calibration to give peak performance.

Can Someone Please Help W/Revel B15 Setup?

Setting up your Revel B15 subwoofer involves key steps to ensure optimal performance. To start, put the subwoofer in a good spot (near a front wall or even better, in a corner of a room for best bass response. Hook your subwoofer up to your receiver/amp using a nice RCA cable (or XLR, whatever your inputs are).

Make sure the subwoofer is actually on, and then check the crossover frequency on both the subwoofer and the receiver and make sure that it matches that of your main speakers. Adjust the volume, phase, and whatnot so that the subwoofer mixes well with your system.

Don’t forget the subwoofer. You might want to utilize its built-in equalization (EQ) controls to tweak the bass response to your room’s acoustics. Refer to the Revel B15 User Manual for details, or contact Revel’s Support Team.

Anyone Experienced With Revel Gems And Sub15/LE1

Yes, I’m currently using this setup, and while I’m impressed with the clarity and detail of the Gems and the deep bass from the Sub15, I’d love some advice on fine-tuning it.

I’ve positioned the Gems at ear level and angled them slightly for better stereo imaging, and I’ve placed the Sub15 near the front wall. I am playing with the LE1 amp, trying to balance the crossover, gain, and phase, but I want to get the best mix of the sub and the speakers.

Got A Broken Revel Concerta B12- What To Do Next?

If you have a broken Revel Concerta B12 subwoofer, the first thing to do is to see how bad the problem is. Check the obvious, like loose wires, blown fuses, or wrong settings that could be responsible for the machine’s failure. If the subwoofer still doesn’t work after troubleshooting, it’s time to consider professional repair options.

Call Revel’s tech support or one of their authorized repair centers and get some professional opinion and repair. They can tell if it is an internal problem like an amplifier or driver, and then fix it.

If the subwoofer is still under warranty, then maybe the repairs will be taken care of, so be sure to check on that. If the damage is too extensive or if the repair costs become too high then they should just replace the whole unit.

Why Subwoofer Randomly Stops Outputting Sound?

One of the most common reasons for this is loose or faulty wiring, often this will cause a disconnect between the subwoofer and the audio line. Sometimes if it’s a power problem like if the power cord is loose or a fuse is blown out the subwoofer will just randomly stop working. Also, bad settings on the AV receiver, such as incorrect crossover frequencies or volume levels, could make the subwoofer drop out.

It gets hot (always after prolonged use) and then the internal over-current protection circuits boot into play and they automatically shut down the subwoofer until it cools off. See if all the connections are tight, check the subwoofer settings, and test it on another comp.

Subwoofer Powered On But No Sound

Why Is My Subwoofer Connected But No Sound? Several factors could be causing the issue. To begin with, verify that the wires connecting your subwoofer to your receiver or audio source are connected firmly and are not damaged.

Then check your AV receiver or audio system’s settings such as subwoofer level, crossover frequency, and mode (on, auto, etc. If a setting is not configured correctly then the subwoofer will not get the right audio signals. Also, be sure that the subwoofer is on the right input source and that the volume is turned up.

If it is still a Subwoofer, No Sound, Perplexed, check the internal fuse, it might have blown because of a power spike. If these simple troubleshooting steps don’t work then it is probably a blown amp or a bad driver and it would need professional repair.

How To Repair A Subwoofer With No Sound

So, How Do I Fix A Subwoofer With No Sound? When a subwoofer has no sound, first check the power supply, making sure that the subwoofer is on and that there are no loose wires or blown fuses. Inspect the audio connections and verify the settings on your receiver, such as the crossover and volume levels.

Try the subwoofer on another system to eliminate the receiver as a possibility. If there’s no sound and no visible damage, the problem may be with internal components like the amplifier or driver, which may require professional repair. For complex issues, it’s best to consult a repair technician.

Why Can I Barely Hear My Subwoofer?

Your subwoofer doesn’t sound that great because you can barely hear it and there are a lot of reasons for that.

• Low Volume Settings: The volume on the subwoofer and the AV receiver. Or the other, because if either one is too low the subwoofer won’t do much.
• Incorrect Crossover Settings: Make sure that your receiver has the correct crossover frequency. But if it is set too low then the subwoofer won’t accept as much of the lower frequencies.
• Phase Alignment Issues: If the subwoofer’s phase is out of sync with the other speakers, cancellation occurs and it doesn’t produce as much. Mess around with the phase control, then maybe it will sound good.
• Room Placement: The subwoofer’s location can greatly affect its performance. Play around with the location of the room, the bass doesn’t always carry too well with acoustics.
• Faulty Connections: Make sure the wires are hooked up and not frayed. Faulty or loose connections can reduce sound output.
• Damaged Components: Even if the internal parts such as the amplifier or driver are messed up, the subwoofer will not give off that full sound.

Why Is No Sound Coming From My Subwoofer?

There could be several reasons for No Sound From Subwoofer When Connected To Audio Receiver.

• Power Supply Issues: Look and see if the subwoofer is turned on, if the plug is in all the way, and if the fuses are blown out.
• Loose or Faulty Cables: Verify that all cables are securely connected and undamaged.
• Incorrect Settings: Well, go to your AV receiver and look at the subwoofer setting, how loud it is, what frequency it’s crossing over at, and what mode the subwoofer itself is in.
• Receiver Configuration: Don’t forget to activate the subwoofer in the audio menu of your receiver.
• Blown Fuse or Damaged Components: Look at that internal fuse, blown amp, or driver.

Any Way To Increase Subwoofer Volume

To increase your subwoofer’s volume, you can try the following methods:

• Adjust Subwoofer Volume Control: Turn up the subwoofer itself, usually on the rear panel.
• Check Receiver Settings: Turn up the subwoofer level or bass management control on your AV receiver so that it sends a stronger signal to the subwoofer.
• Correct Crossover Frequency: Try and turn the crossover frequency on your receiver higher so the subwoofer takes more of the bass frequencies and makes the volume better.
• Change Subwoofer Placement: Placing the subwoofer near a wall or corner will make the bass sound better because of the way the sound waves react with the room.
• Use Bass Boost or EQ Settings: Some receivers and subwoofers come with a bass boost or equalizer settings that make the low frequencies and overall volume much better.
• Upgrade Cables: Use good, well-connected wires to promote optimum sound transfer without distortion.

With these tips, you should be able to get your subwoofer to sound louder and perform better.

15″ Woofer Replacement For Revel Ultima Sub30

To replace the 1.15″ woofer in the Revel Ultima Sub30, you’ll need to find a compatible replacement part from an authorized dealer or service center. However, the equal size, energy, and impedance woofer need to be used to update it. If you’re unsure about the process, it’s recommended to consult Revel customer support or a professional technician to ensure the best performance post-replacement.

Revel Subwoofer Measurements

Revel subwoofers are well known for their accuracy and high-power capabilities, and they have all sorts of specifications such as frequency response, maximum output level, and physical dimensions.

Such as the Revel B112 which has a frequency response of 20Hz to 150Hz and a max SPL of about 112 db. Refer to your user’s manual for your particular model for exact measurements and suggested placements to derive the maximum acoustical advantages in your room.

B112/B110 Subwoofer Quick Start Guide

To use the Revel B112/B110 subwoofer, the first step is to hook it up to your AV receiver via RCA or LFE. Therefore, adjust your phase, crossover, and volume controls according to your speaker system.

For optimal subwoofer placement, see the included booklet for specific recommendations, however, as a general rule, the subwoofer should be placed in a corner or against the front wall of your room for maximum bass response.

What Are Best Revel Subwoofers For Home Theater?

Good choices for a home theater setup are the Revel B112 and B110. The B112 has a 12-inch driver for that hard-hitting bass that sounds good in larger rooms. Its smaller version, the B110, with a 10-inch driver, also performs well, but in smaller rooms.

Why Is There No Subwoofer Output On My Denon Receiver?

If there’s no subwoofer output from your Denon receiver, the issue could be due to several factors:

1. Subwoofer Settings: Make sure the subwoofer is turned on in the receiver’s setup menu in the speaker configuration section.
2. Cables: Make sure the RCA or LFE wire is plugged in all the way and that it is not damaged.
3. Crossover Settings: Oh well at least get that cross-over freq at the right spot so that the subwoofer receives the proper bass signal.
4. Power and Volume: Turn the subwoofer on, and get that unstable to a good level too.
5. Receiver Mode: Ensure the receiver is set to a mode that utilizes the subwoofer, such as 5.1 or 7.1 surround sound.

SVS Or REVEL Subwoofer

SVS and Revel both have very nice subwoofers but they just appeal to different somewhat. SVS subs, like the PB-2000 Pro or SB-3000, are very powerful with low-frequency output and have an extremely deep bass extension for those who want to shake the room and their insides.

Something more like Revel would be nice, like a B112 or B110, they have that nice tight bass that doesn’t hang over and just goes right through a high-end speaker system.

Well, if you are a bass-head then SVS will probably be the way to go but if you are an audiophile who wants accuracy and balance in a high-end home theater system then Revel is the way to go.

Conclusion

To conclude, troubleshooting No Volume From Revel Subwoofer issues involves checking connections, adjusting settings, and experimenting with placement to resolve common problems like no sound or low output. If you do this, your subwoofer will perform better and you will have a much better audio experience.

If problems continue, professional help should be contacted to guarantee proper performance. Your subwoofer is capable of producing that powerful bass that makes your home theater or music listening experience that much better, but only with the right maintenance.

Frequently Asked Questions